Actron CP9575 Bedienungsanleitung PDF herunterladen (Seite 7)

Vehicle Selection

VehicleSelectionwillbedisplayedforReadCodeswhenamanufacturer

specicDTCisretrievedfromthevehicle.

Erase Codes

The Erase function performs the following:

9 Erases Codes (bothConrmedandPendingDTCs).

Permanent codes can only be erased by the vehicle.

9 May erase Freeze Data results depending on the vehcle.

9 Sets I/M Monitors to not ready.

Perform Erase Codes function only after systems have

been checked completely and DTCs have been written

down.

To erase codes from the vehicle computer:

1. Set the ignition to Key On and Engine Off. Do NOT start the

vehicle. The engine should not be running.

2. Press and hold the ERASE key for 3 seconds then release, or

Select Erase Codes from Diagnostic Menu and press

ENTER.

3. Whentheconrmationmessageappearsonthedisplay,choose

one of the following options.

• To proceed with the operation: Press

ENTER for YES.

• To cancel the operation and return to the Diagnostic Menu:

Press BACK for NO.

The Tool will automatically perform the Read Codes function after

erasing codes. The Tool will then indicate the number of codes

remaining.

If after erasing codes a DTC returns, the problem has

notbeenxedorotherfaultsarepresent.

MIL Status

MIL (Malfunction Indicator Lamp) status indicates if the vehicle com-

puter is telling the MIL to illuminate when the engine is running.

• MIL ON indicates that the Malfunction Indicator Lamp should

be ON.

• MIL OFF indicates that the Malfunction Indicator Lamp should

be OFF.

NOTICE

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Keine Kommentare

Actron CP9575 Bedienungsanleitung Seite 7