Actron CP9575 Bedienungsanleitung PDF herunterladen (Seite 11)

Updating Your Tool

1. Download Scanning Suite from http://www.Actron.com/down-

loads/.

2. Install Scanning Suite.

3. Connect USB Cable to Tool and PC.

 If tool displays

PROGRAM MODE,

proceed to step 4.

 If tool displays

DIAGNOSTIC MENU,

select SYSTEM SETUP.

From the system setup

menu, select PROGRAM

MODE and then proceed

to step 4.

4. Start Scanning Suite. Click on Tool Update Icon and follow in-

structions.

Troubleshooting

 If a “LINK ERROR” message appears, cycle the ignition key

to the OFF position for 10 seconds, then back ON, then press

the

ENTER key. Make sure the ignition key is in the ON

not the ACCESSORY position.

 If the MIL Status is ON and the MIL is not illuminated with the

engine running, then a problem exists in the MIL circuit.

PID Denitions

NOTE: Although over 300 PIDS are available, the Tool only

displays the PIDs the vehicle supports.

PROGRAM MODE

See User Manual

DIAGNOSTIC MENU

====================

System Setup

Drive Cycle Monitor

Vehicle Information

State OBD Check

View Data

View Freeze Data





1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Keine Kommentare

Actron CP9575 Bedienungsanleitung Seite 11