Actron CP7529 Wartungshandbuch PDF herunterladen (Seite 9)

IMPORTANT

4. Connect RED and BLACK Battery Clips on Negative Ground Electrical

Systems.

· Connect RED to positive (+) battery post.

· Connect BLACK to engine ground.

On 6-volt electrical systems, use an auxiliary 12-volt battery to

power timing light. Connect BLACK clip to negative (-) post and

RED clip to positive (+) post on auxiliary 12- volt battery. Use 18

AWG or larger wire to connect 12-volt battery negative (-) terminal

to a good engine ground.

On 12-volt Positive Ground electrical systems, connect BLACK clip

to negative (-) battery post and RED clip to engine ground. DO NOT

USE the positive battery post.

On engines equipped with a breaker point ignition system, it will be

necessary to set the point dwell before adjusting the timing. Always

follow the manufacturers specifications and test procedures for

adjusting dwell angle and idle speed.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 25 26

Keine Kommentare

Actron CP7529 Wartungshandbuch Seite 9